Corinium Reversing Camera

Hello, has anyone found out how to make the reversing camera stay on permanently, in the hand book it says that you can achieve this  by using the remote control but I cant get this to work apart from when reverse is engaged. I have also read that you can activate this feature by engaging reverse whilst engine is running then switching of engine selecting neutral, then when you restart engine the built in memory remembers that it was on last time and it will remain on , but that doesn't happen either. Any help very much appreciated.

Thanks

Mabel2

Geoff

On my Veba, pressing the remote power button, with engine on, sometimes more than once, turns on the camera for forward travel. I have tried the switch off engine whilst in reverse dodge, but it doesn't work for me.

You sometimes have to make several attempts making sure the remote is aimed at what seems to be an exact point (left or right) and close up to the mirror. If it has worked before the battery may need replacing but maybe not given the age of your van. Regards

If its the same as the one in our Warwick, its a right pain. Although it would seem possible reading the instruction book there seems to be features that dont function and all that is possible is
auto on when reverse gear selected
and  manual on with remote any other time after the ignition is switch on.

All going to change when warranty has finished to wired on permanently when ignition is on

[You must be registered and logged in to see this link.]
Half an hour and the job is done.
Drivers side, at your feet, under the plastic floor cover.

The camera comes on when the engine is running - not when the ignition is on alone.
The extra switch allows it to be switched off (night driving on motorways for example).

Thanks for that StewPotch, as this probably applies to most the X290s and possibly some X250s I have copied your post into a Factsheet so the info doesnt get lost amongst the many.

Cool - send me the royalties as and when they pour in

Roger

I understand the modification.
But what are the references X250 and X290

Terry

roli wrote:Thanks for that StewPotch, as this probably applies to most the X290s and possibly some X250s I have copied your post into a Factsheet so the info doesnt get lost amongst the many.

Roger, can you add this to the factsheet please. It wasn't obvious (to me) what vehicle it was for.

X290 and X250 are designations for Fiat and Peugeot base vehicles.

Thanks

Cant remember the dates of change to X250 and then X290 but if your van is a 2016/17 Terry it will be an X290

The chassis was built it 2016 
Autosleepers also built it 2016

X290 then. 

You can quickly tell the difference by the headlights - the "slitty eyed" ones (if you would pardon the expression ) are X290 but the larger curved ones are X250. I believe there are interior differences as well.

Mabel2 wrote:Hello, has anyone found out how to make the reversing camera stay on permanently, in the hand book it says that you can achieve this  by using the remote control but I cant get this to work apart from when reverse is engaged. I have also read that you can activate this feature by engaging reverse whilst engine is running then switching of engine selecting neutral, then when you restart engine the built in memory remembers that it was on last time and it will remain on , but that doesn't happen either. Any help very much appreciated.

Thanks

Mabel2

Geoff

Not sure if you have the same model of reversing camera as us but, with the engine running, a press of the red button on the remote with it pointing at the monitor works for us.I

Rather than fumbling with the remote control I've found a less distracting solution for aiming the remote at the spot on the mirror, works every time 
I used double sided automotive tape and a couple of plastic wedges, the sort used by window fitters

I hope this helps

[You must be registered and logged in to see this link.]