Nuevo ES 2009 - Awning light cover
5 posters
The Auto-Sleeper Motorhome Owners Forum (ASOF) :: Auto-Sleeper Motorhome Forums :: Auto-Sleeper "Coachbuilt Motorhomes" Forum
Page 1 of 1
Nuevo ES 2009 - Awning light cover
Does anyone know how to remove the awning light cover on the Nuevo ES 2009 model? Mine has grown inner algae which gives it a green glow!
hallfam7- New Member
-
Posts : 2
Joined : 2012-08-05
Member Age : 80
Location : Eardisley Herefordshire
Auto-Sleeper : Nuevo ES
peugeotboxer- Donator
-
Posts : 2847
Joined : 2011-06-23
Location : Somerset
Auto-Sleeper : Harmony
Vehicle Year : 2000
awning light cover
Hi Richard,
I assume that yours is similar to ours , rather than the later ones which are held on with screws and removal is obvious, if it is as per the photo then it has to be carfully levered off with a sharp screwdriver or similar as it is stuck on with caravan sealer which can be obtained from most caravan or motorhome dealers, I had ours off to alter it from a 10 watt bulb to LED.
[You must be registered and logged in to see this image.]
Brian2
I assume that yours is similar to ours , rather than the later ones which are held on with screws and removal is obvious, if it is as per the photo then it has to be carfully levered off with a sharp screwdriver or similar as it is stuck on with caravan sealer which can be obtained from most caravan or motorhome dealers, I had ours off to alter it from a 10 watt bulb to LED.
[You must be registered and logged in to see this image.]
Brian2
murph- Member
-
Posts : 1052
Joined : 2011-09-05
Member Age : 86
Location : Isle of Man
Auto-Sleeper : Lancashire EK,ES.
Re: Nuevo ES 2009 - Awning light cover
The type Brian has shown has a notch for the screwdriver to engage in to allow prising off.
When I took ours off the bulb holder had corroded badly. I went to an established AS dealer who said they couldnt understand why AS only fitted part of the light assembly as this would prevent water ingress when the O ring seal on the lense was letting water in. The full assembly (now fitted on ours) has a top metal cover which is secured by 2 screws
Whilst off, took the opportunity in following my 12v consultants (murph) guide to power saving and fitted a bayonet adaptor to inset an LED in as this is one light that sometimes you want to leave on.
When I took ours off the bulb holder had corroded badly. I went to an established AS dealer who said they couldnt understand why AS only fitted part of the light assembly as this would prevent water ingress when the O ring seal on the lense was letting water in. The full assembly (now fitted on ours) has a top metal cover which is secured by 2 screws
Whilst off, took the opportunity in following my 12v consultants (murph) guide to power saving and fitted a bayonet adaptor to inset an LED in as this is one light that sometimes you want to leave on.
roli- Moderator
-
Posts : 9701
Joined : 2011-03-04
Location : Warrington
Auto-Sleeper : Warwick Duo
Vehicle Year : 2016
Re: Nuevo ES 2009 - Awning light cover
If it's a 2009 model then I suspect it's fitted with the newer type light as shown on this model which Autosleepers have been using for sometime now
[You must be registered and logged in to see this image.]
[You must be registered and logged in to see this image.]
_________________
Get a life..... Get an Auto-Sleeper!
CC- Moderator
-
Posts : 3618
Joined : 2011-02-05
Member Age : 59
Location : North Norfolk
Auto-Sleeper : Broadway EL Duo
Vehicle Year : 2010
Similar topics
» Drive away awning 2009 NUEVO
» Nuevo EK - awning light not working
» Awning light cover
» Nuevo ceiling light cover broken
» Nuevo 2007 - interior light cover removal
» Nuevo EK - awning light not working
» Awning light cover
» Nuevo ceiling light cover broken
» Nuevo 2007 - interior light cover removal
The Auto-Sleeper Motorhome Owners Forum (ASOF) :: Auto-Sleeper Motorhome Forums :: Auto-Sleeper "Coachbuilt Motorhomes" Forum
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum